Calculations Determined According to the Indoor Installation Regulations
Current Capacity That Cables Can Carry
Voltage drops are limited by certain percentages according to indoor installation regulations. The voltage drop limit determined for socket outlet lines and lighting systems is 1.5%. In motor supplies, this limit should not exceed 3%. In high voltage and medium voltage installations, this limit varies between 5% and 10%. In single-phase and three-phase low voltage networks, the voltage drop calculation is made with different criteria according to the areas of use. The voltage drop must also be calculated as phase and neutral and in volts. The current carrying capacity of cables is only ensured by the voltage drop calculation. If the voltage drop in a structure is greater or less than the force to draw that current, it will cause the system to not work or efficiency to decrease. It is necessary to adhere to these standards not only in connection but also in design and production. The current carrying capacity of cable systems used in main and other column lines is calculated. The suitability of the conductor cross-section is also an important factor. You can contact tr.prysmiangroup.com for high-quality cable systems for production and design.
How the System Works After Control Is Performed
Controls are carried out by technical personnel, and compliance with the standards specified in the regulations is approved. Thus, the current starts to work for all kinds of energy needs in all structures. You can contact us online for your needs with cable systems prepared in accordance with current carrying capacities at the address.
